Form 2 Packages

The standard Form 2 bundle ships with multiple boxes: Resin Cartridge(s), Printer, Finish Kit, Resin Tank(s), and Build Platform(s). The Resin Tank, Build Platform, and additional accessory boxes ship separately from the Form 2 packaging.

From left, the 3 standard shipment boxes: Resin Cartridge, Printer, and Finish Kit.

Packaged shipments have the following dimensions and weights:

  Form 2 Printer Form 2 Finish Kit Resin Cartridge Form 2 Resin Tank Form 2 Build Platform
Dimensions 18x18x27 in 
(46x46x68 cm)
8x9x9 in 
(46x23x23 cm)
9.5x8x3 in 
(24x20x8 cm)
11.25x11x3 in 
(29x28x8 cm)
7x6.75x3 in 
(18x17x8 cm)
Weight 44 lbs (20 kg) 6.6 lbs (3 kg) 3.3 lbs (1.5 kg) 1.8 lbs (0.85 kg) 1.5 lbs (0.67 kg)
Contents Form 2 printer see Finish Kit Set-Up single cartridge single resin tank single build platform

Note: Depending on the shipping territory, power and USB cables may be included inside the Finish Kit box or in the large, external carton containing all items.

Before Receiving Your Form 2

  1. Choose a stable, level workspace for your Form 2. Reserve the following minimum dimensions for the most convenient access: 14 in (36 cm) width, 17 in (43 cm) depth, 30 in (76 cm) height.
  2. Download and install PreForm Software.
  3. Purchase additional supplies:
    • Paper Towels
    • Isopropyl Alcohol (90% or higher)

Isopropyl alcohol is the recommended solution for rinsing parts and cleaning liquid resin after each completed print. Keep paper towels in stock to ensure a clean work environment for printing and finishing.

Unboxing Your Form 2

TIP:

Save the Form 2's packaging for transporting your printer. Original packaging is required for warranty service.

1. Remove the top foam packaging insert.  

2. Use the provided handles to lift your printer from the box.

3. Remove the printer from the carrier tray and set in workspace.

WARNING:

Remove all packaging material before connecting power. Lift the cover to remove the protective shipping material from the resin tank carrier.

4. Plug the included power cable into your printer and connect to a power outlet.

Proceed to set up the Finish Kit and connect to your Form 2.